spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 1 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 preliminary spec part number : AA1010QW10ZC white attention observe precautions for handling electrostatic discharge sensitive devices description the led is encapsulated with a soft silicone material. features z plcc-4 package. z single color. z high luminance. z high power,operating current @350ma. z suitable for all smt assembly methods. z package : 500pcs / reel. z moisture sensitivity level : level 4. z patent pending. z rohs compliant. package dimensions xpower notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .25(0.01") unless otherwise noted. 3. specifications are subject to change without notice. 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 2 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 figure 1 in general, leds should be handled by the sides of the package. handling instruments should not touch the emitting surface of the led package. figure 2 for automated pick-and-place machines, the pickup nozzle should be larger than the size of the led reflector area to avoid placing excess pressure on the led surface. applications z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z portable light source (e.g. bicycle flashlight). z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. application notes z pressure or stress can damage the encapsulating materi al and affect the reliability of the led. precau- tion should be taken to avoid pressure on the led encapsulating surface. z static electricity and surge damage the leds. it is recommended to use a wrist band or an ti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. z handling indications use proper handling techniques to prevent damage to the led surface. minimize mechanical stress on the led surface during processing and handling. do not touch the emitting surface with sharp objects to avoid scratching or damaging the led.
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 3 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 selection guide parameter symbol value unit power dissipation p t 1.25 w junction temperature t j 110 c operating temperature top -40 to +85 c storage temperature ts t g -40 to +85 c dc forward current [1] i f 350 ma peak forward current [2] i fm 500 ma thermal resistance [1] r th 9 c/w absolute maximum ratings at t a =25c electrical / optical characteristics at t a =25c parameter symbol value unit chromaticity coordinate x acc.to cie1931 i f =350ma [typ.] x [1] 0.31 - chromaticity coordinate y acc.to cie1931 i f =350ma [typ.] y [1] 0.31 - forward voltage i f =350ma [min.] v f [2] 2.8 v forward voltage i f =350ma [typ.] 3.2 forward voltage i f =350ma [max.] 3.6 temperature coefficient of x i f =350ma, -10 c t 100 c [typ.] tc x -0.6 10 -3 / c temperature coefficient of y i f =350ma, -10 c t 100 c [typ.] tcy -0.2 10 -3 / c temperature coefficient of v f i f =350ma, -10 c t 100 c [typ.] tc v -3.2 mv/ c part no. dice lens type luminous intensity [2] iv(cd)@ 350ma v iewing angle [1] min. typ. min. typ. 2 1/2 AA1010QW10ZC white (ingaaln) water clear 12 20 20 58 120 v (lm) [2] @ 350ma notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity / luminous flux: +/-15%. notes: 1.results from mounting on pc board fr4(pad size 100mm 2 per pad), mounted on pc board-metal core pcb is recommend for lowest thermal resistance. 2.1/10 duty cycle, 0.1ms pulse width. notes: 1.measurement tolerance of the chro maticity coordinates is 0.01 2.forward voltage: +/-0.1v.
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 4 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 AA1010QW10ZC
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 5 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 AA1010QW10ZC white cie 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 x 0.264 0.283 0.296 0.280 x 0.248 0.275 0.283 0.264 x 0.283 0.330 0.330 0.287 y 0.267 0.305 0.276 0.248 y 0.286 0.321 0.305 0.267 y 0.305 0.360 0.339 0.295 reference cct: 14000~9000k reference cct: 14000~9000k reference cct: 9000~5600k b2 b3 b4 x 0.287 0.330 0.330 0.296 x 0.275 0.298 0.306 0.283 x 0.298 0.321 0.330 0.306 y 0.295 0.339 0.318 0.276 y 0.321 0.350 0.332 0.305 y 0.350 0.379 0.360 0.332 reference cct: 9000~5600k reference cct: 9000~7000k reference cct: 7600~5600k c0 c1 x 0.330 0.361 0.356 0.330 x 0.321 0.366 0.361 0.330 y 0.360 0.385 0.351 0.318 y 0.379 0.419 0.385 0.360 reference cct: 5600~4600k reference cct: 6000~4600k a1 a0 b3 b1 b2 b4 c0 c1
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 6 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 AA1010QW10ZC reel dimension tape specifications (units : mm) recommended soldering pattern (units : mm; tolerance: 0.1)
spec no: dsah7163 rev no: v.1 date:aug/29/2007 page: 7 of 7 approved: wynec checked: allen liu drawn: w.j.hua erp: 1201003031 packing & label specifications AA1010QW10ZC
|
